CONSTRUCTIONDEAL.COM
An Unusual Guide to Use Concrete Pump Trucks
by Georgia Moore on May 30, 2017

Concrete pump trucks provide most economical and fastest way to place concrete on the construction jobs. And with so many different types of concrete pump trucks for sale now available, it is much easier for a contractor to pick one as per their specific requirements. In this post, we’ll have a look at some handy tips and advice to use the pump trucks with utmost efficiency.

Concrete pump trucks are now very commonly used, especially for large construction projects, due to the number of benefits they offer as compared to other methods of placing concrete. However, the whole process is not free from dangers and often has many hazards. 

Safety is a major concern when using a concrete pump truck and some tips and advice that can help contractors ensure enhanced safety are mentioned below. 

Responsibilities of a contractor

With many different types of concrete pump trucks for sale now available, it is now easier for the contractors to select a truck which perfectly suits their requirements. Moreover, with companies like Concrete Pump Depot in Colorado offering high-quality used pump trucks, contractors can now buy these trucks at highly affordable prices. However, organization plays an integral role when it comes to reducing the safety issues at the construction site. 

A contractor should make sure that all the right equipment are available with respect to the construction job. They are also responsible for identifying the potential hazards and take adequate safety measures to prevent such accidents. 

Power lines

The chassis, truck boom, remote-control cable and the steel braided hose are excellent electricity conductors. Moreover, the high water content of the concrete also makes it a deathly conduit of electricity if any pump machinery part gets in contact with the power lines. 

As a result, OSHA has recommended that a full-time spotter should always be available to monitor the movement of the boom. Moreover, ACPA has also recommended that the boom tip or any other part of the boom should be at least 5 meters away from the power lines. 

Cribbing

Proper cribbing is also important to make sure that the balance or weight of the cement load is distributed adequately. Usually, the pump manufacturers do provide a few outrigger pads with the equipment. However, it is recommended that the contractors should use additional wood dunnage or steel plates for additional cribbing if required.

Outriggers

Apart from power lines, improper outrigger procedures are also responsible for a number of accidents at construction sites. Outriggers that do not have adequate cribbing are commonly responsible for tip overs. Another common reason is when the site surface is not prepared properly to support the outrigger. The type of soil plays an important role to keep the outriggers safe. The load-bearing capacity of every type of soil is different, and this should be taken into consideration during the outrigger process.  

Other obstructions

Apart from the power lines, there can be a number of other obstructions at a job site, like scaffolding, buildings, or cranes. Ensure that the articulation and length of the boom are correct for the job. While a short boom might be able to place the concrete correctly, it can sometimes be unable to clear the obstructions. 

Keep the points mentioned above in mind when using concrete pump truck to create a safe and efficient working environment. 


Rate: 11

Comments (0)

Name (required)
E-Mail (required) (Will not be published)
Website